Fast, Reliable Gate Installation Across Maywood
Gate installation in Maywood, CA typically runs $1,800–$4,500 for a standard driveway gate and $850–$2,200 for a pedestrian gate, with most projects completed in 1–3 days depending on masonry and fabrication needs. Our Gate Installation team knows Maywood’s 90270 zip code well — we’ve spent 17 years working on the exact kind of small-lot, pre-1960 homes that dominate this city. Carlos and his team respond to Maywood calls directly from our Commerce-adjacent route, which means we’re usually on-site within the hour for estimates and can often start fabrication the same day. Call (866) 426-1530 for a free estimate.
Why Anchor Gate Repair San Francisco Is Maywood’s Preferred Gate Installation Company
Maywood is one of the most densely populated cities in California, and that density shapes every gate job we do here. We’ve installed and replaced gates on Atlantic Boulevard, Pine Avenue, and the narrow residential streets off Slauson Avenue — enough to know that a standard 12-foot driveway gate kit from a big-box store won’t fit most Maywood lots. Our 304 verified reviews averaging 4.8 stars include dozens from Maywood landlords and homeowners who needed custom solutions for tight openings.
Carlos Estrada, our Owner and Service Manager, personally reviews every Maywood estimate for masonry and fabrication requirements. Seventeen years of gate-only experience means we’ve seen the exact failure modes your property is likely showing: hinge posts cast into 1950s concrete, wrought iron frames thinned by decades of LA Basin smog, and slide tracks rusted through from industrial particulate. We don’t quote a gate replacement without checking for these conditions first.
Our in-house welding and parts fabrication capability matters especially in Maywood. Most gate companies here will measure, order standard hardware, and hope it fits. We measure, fabricate on-site if needed, and handle the masonry extraction and re-anchoring that original installations often require. Same crew, same day, no subcontractor delays.
Our Gate Installation Services in Maywood
Swing Gate Installation
Swing gates remain the most common request we get in Maywood, and they’re also where we see the most underestimated jobs. Many properties on 58th Street and the surrounding blocks have original 1950s–1960s wrought iron swing gates with hinge posts set directly into brick pilasters or cast into concrete footings. When that hinge seizes or the post corrodes through, replacing just the gate leaf isn’t enough — we have to extract the old post, repair or repour the masonry, and re-anchor a new post plumb and level. A typical swing gate installation in Maywood runs $2,200–$4,500 when masonry work is involved, or $1,800–$3,200 for a clean replacement on newer construction.
Sliding Gate Installation
Sliding gates are essential for Maywood’s narrow driveways where a swing gate would block the sidewalk or encroach on the neighbor’s property line. We recently replaced a heavily corroded sliding gate at a duplex on Pine Avenue where the original 1950s steel track had rusted through from decades of LA Basin smog. Our crew fabricated a new custom track and installed a refurbished DoorKing slide operator, matching the tight 8-foot opening that off-the-shelf hardware couldn’t fit. The job involved cutting out the old concrete-anchored hinge post and repouring the footing — essential for long-term stability in Maywood’s dense, older housing stock. Sliding gate installations here typically range $2,800–$5,500 depending on track length and operator brand.
Security Gate Installation
Security gates in Maywood work harder than almost anywhere else in the LA Basin. The combination of heavy daily use, smog-accelerated oxidation, and original hardware that’s now 60–80 years old means we install security gates with heavier-gauge tubing, upgraded latch mechanisms, and access-control integration that can handle the cycle count. We regularly install security gates for multi-unit conversions on small lots where the original 1920s bungalow now has three separate tenant entrances, each needing controlled access. Security gate installations in Maywood run $2,500–$6,000 with access control, or $1,800–$3,500 for manual locking models.
Pedestrian Gate Installation
Pedestrian gates in Maywood are almost always custom-fitted. The compact lot configurations on streets near Slauson Avenue and Atlantic Boulevard mean openings are frequently 30–36 inches wide — narrower than standard pre-hung gate kits. We fabricate pedestrian gate frames in-house to match these exact dimensions, typically using 14-gauge steel or reinforced aluminum for durability in Maywood’s corrosive air. Pedestrian gate installations run $850–$2,200 depending on material and whether we’re matching existing driveway gate styling.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Maywood
We work on the brand you already have, and we install new equipment from the manufacturers we know best. In Maywood, we most frequently install and service FAAC and BFT operators for commercial and multi-unit properties where reliability under heavy use matters, and Linear and Viking systems for residential automated gates. We stock common parts for these brands locally, which means when your Maywood property needs a replacement operator or access-control upgrade, we’re not waiting on a two-week shipping window. Carlos and his team are factory-familiar with all nine major brands we service, including DoorKing and Elite for the access-control integrations that many Maywood landlords now request.
Common Gate Installation Problems We See in Maywood Homes
- Concrete-cast hinge posts on original 1950s–1960s gates. The distinctive hook for Maywood properties: many original wrought iron driveway gates have hinge posts set directly into brick pilasters or cast into concrete, so replacing a failed hinge frequently requires masonry work to extract and re-anchor the post. Most gate companies don’t quote this scope upfront, leading to mid-project change orders.
- Narrow custom-fitted openings on 1920s–1950s lots. Maywood’s extremely compact lot configurations mean driveway and pedestrian gates are typically narrow and custom-fitted to tight openings. Standard off-the-shelf replacement hardware is a poor fit and requires on-site fabrication or modification that generalist installers can’t perform.
- Smog-accelerated oxidation on wrought iron and tubular steel. Sitting adjacent to Vernon’s heavy industrial corridor, Maywood properties experience elevated particulate air pollution that accelerates surface rust faster than in coastal communities. We see tubular steel frames warp and latches seize from this corrosion, often past the point of hardware-only repair.
- Santa Ana wind damage to wooden and lighter metal gates. Periodic Santa Ana wind events stress and warp wooden gate components and can torque lighter metal frames out of alignment. We install heavier-gauge materials and reinforced posts in Maywood specifically to withstand these conditions.
Pricing for Gate Installation in Maywood, CA
| Gate Type | Typical Range in Maywood | What Affects Cost |
|---|---|---|
| Pedestrian gate (manual) | $850–$1,800 | Width, material gauge, custom fabrication needs |
| Pedestrian gate (automated) | $1,600–$2,200 | Operator brand, access-control integration |
| Single swing driveway gate | $1,800–$3,200 | Post condition, masonry work, operator if automated |
| Double swing driveway gate | $2,500–$4,500 | Dual operators, center stop, masonry extraction |
| Sliding driveway gate | $2,800–$5,500 | Track length, custom fabrication, concrete work |
| Security gate with access control | $2,500–$6,000 | Entry system type, intercom, keypad or card reader |
Maywood’s older housing stock pushes most jobs toward the higher end of these ranges. The masonry extraction and re-anchoring that original installations require adds $400–$900 to a typical swing gate replacement. Custom track fabrication for narrow sliding gates adds $300–$700. We quote these items upfront, not as surprises mid-project. Call (866) 426-1530 for a free estimate — we’ll inspect your posts, measure your opening, and give you a number that reflects the actual scope.
We Also Serve Cities Near Maywood
Carlos and his team work the full corridor from Bell through Cudahy, Commerce, and Huntington Park — the same dense, older housing stock with the same gate challenges. If you’re in one of these neighboring cities and dealing with corroded original hardware or a narrow opening that standard kits won’t fit, we apply the same Maywood-tested approach to your job.
Serving Maywood, CA — Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in Maywood
Yes, we extract and re-anchor concrete-cast hinge posts as part of our standard installation scope in Maywood. Most gate companies quote the gate replacement alone, then discover the post condition once they start demolition. We inspect the post anchoring during our free estimate and include any masonry work in our upfront price. Call (866) 426-1530 to schedule an inspection.
Yes, we fabricate custom pedestrian gate frames in-house to fit Maywood’s narrow openings, which are common on 1920s–1950s lots. Standard pre-hung gates start at 36 inches, so off-the-shelf hardware won’t work for your 30-inch opening. We build to your exact dimensions, typically in 14-gauge steel or reinforced aluminum. Call (866) 426-1530 for measurements and a free quote.
It depends on frame thickness and extent of corrosion, but in Maywood’s smog-heavy environment, we often find the frame itself has thinned past safe repair by the time the hardware seizes. If the tubular steel has lost more than 20% of its wall thickness to oxidation, we recommend full replacement with heavier-gauge material. Hardware-only replacement typically runs $400–$800; full gate replacement with upgraded materials runs $2,500–$4,000. We assess this honestly during your free estimate — call (866) 426-1530.
Yes, sliding gates are our recommended solution for Maywood’s narrow driveways where swing gates would block sidewalks or encroach on neighboring properties. We fabricate custom tracks to fit tight openings as small as 8 feet, and we handle the concrete footing work that original installations often require. Typical sliding gate installation in Maywood runs $2,800–$5,500. Call (866) 426-1530 to discuss your driveway dimensions.
If your gate frame and hinges are structurally sound, we can replace just the operator. We work on the brand you already have and install new LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule operators depending on your gate type and use case. Operator-only replacement in Maywood typically runs $1,200–$2,400 including removal of the old unit and programming. If your gate frame is corroded or warped, we’ll tell you during the free estimate. Call (866) 426-1530 to schedule.
Ready for a gate that actually fits your Maywood property? Carlos Estrada and the team at Anchor Gate Repair San Francisco handle the masonry extraction, custom fabrication, and brand-specific installation that Maywood’s older homes demand. No subcontractor delays, no off-the-shelf guesswork. Call (866) 426-1530 for a free estimate — we’ll measure your opening, inspect your posts, and give you a price that reflects the real scope of your job.
Written by Carlos Estrada, Owner and Service Manager at Anchor Gate Repair San Francisco, serving Maywood and surrounding communities since 2007.